Sandsteel sells self-sharpening scraper blades. To check an option for your equipment, include profile, dimensions and processed material. If the purchase is for replacement, please also send the specification of the current blade and describe the wear observed.
SCRAPER BLADES FOR PRINTING
Self-sharpening scraper blades
Self-sharpening scraper blades (doctor blades) scrape and accurately meter ink in flexographic and rotogravure printing. Made from fine-grained high-carbon or stainless steel, they have an undercut recess at the working edge and help produce clearly defined lines, halftones and solid areas.
Key feature: a precision undercut in the self-sharpening profile promotes even cylinder contact, lower working pressure and consistent print quality.
Common applications
• Flexographic printing on flexible packaging
• Printing of lines, halftones and solid areas
• Rotogravure
• Conventional and enclosed doctor blade systems
• Label and tag printing
• Varnish application in rotary processes
• Scraping and metering ink on the anilox cylinder
Available in rolls or coils packed in 50- or 100-meter boxes, or as strips or pieces cut to the required length. Special sizes are available on request.
DOCTOR BLADE PROCESS


Illustrations of two systems that use doctor blades in
flexographic printing.
Steel | C | Si | Mn | Cr | Mo | P max. | S max. | |||
|---|---|---|---|---|---|---|---|---|---|---|
High carbon | 1.00 | 0.25 | 0.45 | 1.40 | — | 0,015 | 0,004 | |||
Stainless | 0.68 | 0.40 | 0.70 | 13.00 | 1.00 | 0,025 | 0,015 | |||
Composition may vary between batches of raw material. | ||||||||||
Condition | Hardness | Tensile strength | |||||||
|---|---|---|---|---|---|---|---|---|---|
High carbon | 54–56 HRC | 2,050 ± 100 MPa | |||||||
Stainless | 52–56 HRC | 1,900 ± 100 MPa | |||||||
High-carbon steel | High-carbon steel | Stainless steel |
|---|---|---|
0.15 x 25 mm 0.15 x 30 mm 0.15 x 35 mm 0.15 x 40 mm 0.15 x 50 mm | 0.20 x 25 mm 0.20 x 30 mm 0.20 x 35 mm 0.20 x 40 mm 0.30 x 35 mm | 0.15 x 40 mm 0.15 x 50 mm 0.20 x 50 mm |
Sandsteel can supply self-sharpening blades cut to the required length at no extra cutting charge. | ||
Product FAQs
No. The self-sharpening blade also wears during contact. The designation does not eliminate inspection and replacement, nor does it guarantee a fixed number of labor hours for any process. Self-sharpening blade wear and inspection.
Width is not enough to choose replacement. Profile, thickness, length and fit of the self-sharpening blade must match the equipment; The contact geometry also participates in the evaluation. Contact geometry and self-sharpener replacement.
Comparison requires equivalent operating conditions and the same exchange criteria. Pressure, speed, processed material and scraping quality influence the result; a comparison with different settings does not isolate the effect of the blade. Criteria for comparing blade duration.