Yes. Sandsteel sells tempered AISI 420 spring stainless steel strip, with a reference hardness of 50 to 52 HRC. It needs to be selected according to the environment and manufacturing operations, which differ from those used in annealed stainless steel strip.
QUENCHED AND TEMPERED MARTENSITIC STAINLESS STEEL
AISI 420 TR stainless spring steel strip
AISI 420 TR is a magnetic martensitic stainless spring steel strip, cold-rolled and supplied quenched and tempered. It combines high hardness, mechanical strength and fatigue resistance with moderate corrosion resistance. It is suitable for parts subject to bending, cutting and repeated loading. The hardened condition can reduce later heat-treatment steps when making springs, stampings, saws and cutting tools.
Key feature: high hardness and fatigue resistance. The quenched and tempered condition reduces later heat-treatment steps.
Common applications
• Springs, spring leaves and elastic components
• Stamped parts requiring limited forming
• Cutting tools and cutlery
• Saws and discs for cutting meat and other foods
• Food-processing equipment components
• Technical parts subject to repeated loading and fatigue
• Parts exposed to moisture or in contact with liquids, depending on the conditions of use
Available in coils, rolls or strips slit to the required width within our slitter’s capacity. Maximum width: 300 mm. Thicknesses above 1.20 mm are available only as blanks or pieces.
Grade | C | Si max. | Mn max. | P max. | S max. | Cr |
|---|---|---|---|---|---|---|
420 TR | 0.26–0.40 | 1.00 | 1.00 | 0,040 | 0.03 | 12.0–14.0 |
Composition may vary with the manufacturer and delivery specification. | ||||||
Condition | Hardness | Tensile strength | Finish | Edges |
|---|---|---|---|---|
Quenched and | 50–52 HRC | 1770–1900 MPa | Polished white | Sharp edges |
Confirm the edge condition when requesting a quote. | ||||
Thicknesses and | 0.15 ±0.02 | 0.30 ±0.03 | 0.50 ±0.04 | 1.00 ±0.06 |
|---|---|---|---|---|
Width | Maximum 300 mm | |||
Typical stock tolerances. Values may vary with origin, manufacturer and delivery condition. Minimum width is subject to technical review. Thicknesses above 1.20 mm are available only as blanks or pieces. | ||||
DIN 1.4028 | X30Cr13 | SUS 420J2 |
Product FAQs
Yes. Sandsteel's AISI 420 strip is tempered, with a reference hardness of 50 to 52 HRC. This condition differs from annealed material and influences cutting and forming operations. Tempered AISI 420 processing.
No. Tempered AISI 420 combines hardness with corrosion resistance, but is not immune to staining or chemical attack. The environment, cleanliness and finish of the piece remain relevant to its performance. Surface care on AISI 420.
It may change in the heated region. A welding operation affects the metallurgical condition of the tempered AISI 420, so the initial hardness of the strip does not prove the properties of the finished joint. Heat and hardness in the welded region of AISI 420.