Sandsteel supplies annealed AISI 430 BA stainless steel strip with a bright finish for stamped parts and decorative components. Provide dimensions and quantity for a quote. Suitability depends on the service environment.
ANNEALED FERRITIC STAINLESS STEEL — BA
AISI 430 BA stainless steel strip
AISI 430 BA is a magnetic ferritic stainless steel strip, cold-rolled and supplied annealed with a bright BA (Bright Annealed) finish. With approximately 16–18% chromium, it offers good corrosion resistance in moderately aggressive environments, good formability and an excellent surface finish. Bright annealing takes place in a controlled atmosphere, producing a smooth, reflective surface that usually requires no further polishing. It is suitable for stamped parts, decorative components, appliances, utensils and equipment where appearance, cleanliness and competitive cost matter.
Key feature: a uniform bright BA finish, with good formability and corrosion resistance for indoor use and moderate environments.
Common applications
• Appliances and white goods
• Sinks, basins and household utensils
• Stamped and formed parts
• Decorative components and finishes
• Pole banding
• Commercial kitchen equipment
• Panels, trim and interior cladding
• Food-processing equipment components
• Gutters, ducts and general-purpose parts
Available in coils, rolls or strips slit to the required width within our slitter’s capacity.
Maximum width: 300 mm. See the stock table for available thicknesses.
Grade | C max. | Si max. | Mn max. | P max. | S max. | Cr | Ni max. |
|---|---|---|---|---|---|---|---|
430 | 0.12 | 1.00 | 1.00 | 0,040 | 0,030 | 16.0–18.0 | 0.75 |
Composition may vary with the manufacturer and delivery specification.
Condition | Hardness | Tensile strength | Finish | Edges |
|---|---|---|---|---|
Annealed | Up to 89 HRB | 450 MPa min. | BA (bright) | Sharp edges |
Confirm the edge condition when requesting a quote.
Thicknesses and | 0.30 ±0.04 | 0.50 ±0.04 | 1.00 ±0.08 |
|---|---|---|---|
Width | Maximum 310 mm | ||
Values may vary with origin, manufacturer and delivery condition. Minimum width is subject to technical review. | |||
EN 1.4016 | X6Cr17 | UNS S43000 | JIS SUS430 | BS 430S17 |
Product FAQs
BA stands for bright annealed. A controlled atmosphere produces the smooth, reflective surface of AISI 430 BA for parts where appearance and finish matter. Bright annealing of AISI 430 BA.
No. AISI 430 BA is a magnetic ferritic stainless steel. Magnetic attraction is normal for this grade and alone does not establish a defect or indicate a different grade. Magnetism in ferritic AISI 430 BA.
No. AISI 430 BA is used in moderately aggressive environments. Its bright finish does not change its corrosion resistance limits. Consider exposure, cleaning conditions and part function when comparing stainless steel grades. Exposure and surface care for AISI 430 BA.