Sandsteel sells annealed AISI 316/316L strip, which contains molybdenum. For parts in contact with chemical agents, compatibility depends on the agent and temperature. The quote also depends on the dimensions of the strip.
ANNEALED AUSTENITIC STAINLESS STEEL
AISI 316/316L stainless steel strip
Annealed AISI 316/316L is a cold-rolled austenitic stainless steel strip with added molybdenum for components exposed to more corrosive environments. It combines high corrosion resistance, good formability and a good surface finish. It is widely used in the chemical and food industries and for parts exposed to corrosive liquids. AISI 316L has a lower carbon content and is suitable for applications that involve welding.
Key feature: high corrosion resistance in chemical and chloride environments, with good formability, weldability and surface finish.
Common applications
• Stamped stainless steel parts and components
• Formed and deep-drawn parts (check batch hardness)
• Clamps, bands and fasteners
• Equipment and components for the chemical and petrochemical industries
• Coils, expansion joints and process components
• Surface cladding and finishes
• Food-processing equipment and components
• Parts immersed in or exposed to corrosive liquids
Available in coils, rolls or strips slit to the required width within our slitter’s capacity. Maximum width: 310 mm. Thicknesses above 2.00 mm are available only as blanks or pieces.
Grade | C max. | Si max. | Mn max. | P max. | S max. | Ni | Cr | Mo | |
|---|---|---|---|---|---|---|---|---|---|
316 | 0.08 | 0.75 | 2.00 | 0,045 | 0.03 | 10.0–14.0 | 16.0–18.0 | 2.0–3.0 | |
316L | 0.03 | 0.75 | 2.00 | 0,045 | 0.03 | 10.0–14.0 | 16.0–18.0 | 2.0–3.0 | |
Composition may vary with the standard and manufacturer.
Condition | Hardness | Tensile strength | Finish | Edges | |
|---|---|---|---|---|---|
Annealed | 93 HRB max. | ≈ 610 MPa | 2B (pickled) | Sharp edges | |
*Confirm the BA finish and edge condition when requesting a quote. Check batch hardness for deep-drawn parts.
Thicknesses and | 0.05 ±0.01 | 0.30 ±0.03 | 1.00 ±0.05 | 2.50 ±0.09 | |
|---|---|---|---|---|---|
Width | Maximum 310 mm | ||||
Typical stock tolerances. Values may vary with origin, manufacturer and delivery condition. Thicknesses above 2.00 mm are available only as blanks or pieces.
DIN 1.4401 / 1.4404 | X5CrNiMo17-12-2 / X2CrNiMo17-12-2 | UNS S31600 / S31603 |
Product FAQs
AISI 316/316L contains molybdenum, unlike AISI 304/304L. This element is associated with resistance to corrosion in certain environments, but the choice also involves agent concentration, temperature and exposure conditions. Molybdenum and corrosion resistance of AISI 316/316L.
No. The resistance of AISI 316L depends on the chemical agent, concentration and temperature. In continuous contact, these data are decisive for the compatibility of the strip with the medium. AISI 316/316L Chemical Exposure Limits
Not directly. The annealed condition of AISI 316/316L favors forming, but is not equivalent to the hardened state of a spring strip. Corrosion resistance and elastic response are separate requirements. Annealed condition and forming of AISI 316/316L.