Sandsteel sells SAE 1070 TR spring steel strip, quenched and tempered, with a reference hardness of 44 to 48 HRC. The strip serves as raw material for flat springs and latches. Component performance depends on the design and manufacturing process. The quote starts from measures, quantity and application.
QUENCHED AND TEMPERED CARBON STEEL
SAE 1070 TR spring steel strip
SAE 1070 TR is a high-carbon spring steel strip supplied quenched and tempered. It is used to make flat parts that require limited forming. The supplied condition eliminates a later hardening step and reduces the number of production steps.
Key feature: high mechanical strength and good toughness, allowing bends of up to 90°.
Common applications
• Scraper blades and saws for foam, mattresses, wood and paper
• Springs, rings and washers
• Compressor valves, spatulas and construction accessories
• Guides, rulers, bands and steel strips
• Cutlery and cutting tools
• Tool shims
Available in coils, rolls or strips slit to the required width within our slitter’s capacity. Maximum width: 310 mm.
C | Si | Mn | P max. | S max. | Cr (max.) |
|---|---|---|---|---|---|
0.70–0.80 | 0.15–0.30 | 0.60–0.90 | 0.03 | 0.01 | 0.20 |
Composition may vary with the standard and manufacturer. Some certificates may list elements such as Cr | |||||
Condition | Hardness | Tensile strength | Finish | Edges |
|---|---|---|---|---|
Hardened | 44–48 HRC | 1,400–1,580 MPa | Natural blue | Sharp edges Rounded edges |
Confirm finish availability when requesting a quote. | ||||
Thicknesses and | 0.20 ±0.02 | 0.50 ±0.04 | 0.90 ±0.05 | 2.00 ±0.08 3.00 ±0.10 |
|---|---|---|---|---|
Width | Maximum 310 mm | |||
Typical stock tolerances. Values may vary with origin, manufacturer and delivery condition. | ||||
C67S | CS70 | C75 | C75S | CK75 | EN 10132 | DIN 1.1248 | SAE 1075 |
Product FAQs
Not as a mandatory step. TR means quenched and tempered: the strip is already sold in this condition. Further treatment should only be planned when the project requires it, as it may change the properties of the material. Understand TR condition and strip hardness.
Does not make the material stainless. SAE 1070 remains subject to corrosion, and protection depends on humidity, storage time and the environment in which the part is used. See how finishing and conservation relate.
The same process does not automatically apply. Quenching and tempering change the bending behavior of the strip. The combination of thickness, radius, angle, rolling direction and edge condition affects forming. Bending and shaping of SAE 1070 TR strip
The width must meet the drawing along with its tolerance and the condition of the edges. Thickness is another measurement and needs to be specified separately. Burr and flatness also matter when they interfere with strip fit or processing. Slitting and edge quality
Yes. Heating can change the properties of the affected region, even if the rest of the strip maintains its original condition. The union and possible subsequent treatment need to be defined by the technician responsible. Understand the limits of welding and heating.
Send thickness and width separately, tolerances, finish, quantity and application. Also include coil presentation requirements when necessary for your process, in addition to the drawing and requirements for hardness, edge and batch documentation. Details for your quote request