Yes. Sandsteel sells tempered 420Mo spring stainless steel strip, with a reference hardness of 52 HRC. When manufacturing blades, dimensions, contact and environment need to be compatible with the application. Hardness alone does not determine useful life.
QUENCHED AND TEMPERED MARTENSITIC STAINLESS STEEL
AISI 420Mo TR stainless spring steel strip
AISI 420Mo TR is a magnetic martensitic stainless spring steel strip, cold-rolled and supplied quenched and tempered. Added molybdenum improves corrosion resistance compared with standard AISI 420 while retaining high hardness, mechanical strength and fatigue resistance. It is suitable for springs, stampings, saws, cutting tools and components subject to bending, wear and repeated loading. The hardened condition can reduce later heat-treatment steps.
Key feature: better corrosion resistance than standard AISI 420, with high hardness and fatigue resistance in the quenched and tempered condition.
Common applications
• Springs and elastic components
• Stamped parts requiring limited forming
• Cutting tools and cutlery
• Saws and blades for cutting meat and other foods
• Medical and hospital instruments and components
• Technical parts subject to repeated loading and fatigue
• Food-processing equipment components
• Parts exposed to moisture or in contact with liquids
Available in coils, rolls or strips slit to the required width within our slitter’s capacity.
Maximum width: 300 mm. Thicknesses above 1.50 mm are available only as blanks or pieces.
Grade | C | Si max. | Mn max. | P max. | S max. | Cr | Mo |
|---|---|---|---|---|---|---|---|
420Mo TR | 0.38 | 1.00 | 1.00 | 0,040 | 0.03 | 13.5 | 1.00 |
Composition may vary with the manufacturer and delivery specification. | |||||||
Condition | Hardness | Tensile strength | Finish | Edges |
|---|---|---|---|---|
Quenched and | 52 HRC | 1800 MPa | Polished white | Sharp edges |
Confirm the edge condition when requesting a quote. | ||||
Thicknesses and | 0.15 ±0.02 | 0.30 ±0.03 | 0.50 ±0.04 | 1.00 ±0.06 1.20 ±0.06 |
|---|---|---|---|---|
Width | Maximum 300 mm | |||
Typical stock tolerances. Values may vary with origin, manufacturer and delivery condition. Minimum width is subject to technical review. Thicknesses above 1.50 mm are available only as blanks or pieces. | ||||
DIN 1.4028Mo | DIN 1.4419 | X30Cr13 | 7C27Mo2 | UHB716 |
Product FAQs
The composition of 420Mo includes molybdenum. Sandsteel's reference is 52 HRC for tempered 420Mo strip, while AISI 420 has a range of 50 to 52 HRC; this proximity does not prove equivalence between the alloys. Alloy and mechanical condition of AISI 420Mo.
No. 52 HRC describes the reference hardness of the material. Blade profile, pressure, abrasiveness and contact conditions influence wear, therefore this value does not alone determine the replacement interval. Edge wear and geometry on AISI 420Mo.
Yes. The heat from processing can change the condition of the cut region. In components that depend on edge hardness, the final cutting condition is relevant in addition to the initial properties of the strip. Processing heat at the edge of AISI 420Mo.