ANNEALED AUSTENITIC STAINLESS STEEL

AISI 304/304L stainless steel strip

Annealed AISI 304/304L is a cold-rolled austenitic stainless steel strip for stamped, formed and deep-drawn parts that require corrosion resistance and a good surface finish. AISI 304L has a lower carbon content and is particularly suitable for applications that involve welding.

Key feature: a balance of corrosion resistance, formability and surface finish, with good suitability for stamping and deep drawing.

Common applications

• Stamped stainless steel parts and components

• Formed and deep-drawn parts (check batch hardness)

• Clamps, bands and fasteners

• Expansion joints and coils

• Surface cladding and finishes

• Food-processing equipment components and general industrial applications

Available in coils, rolls or strips slit to the required width within our slitter’s capacity. Maximum width: 310 mm. Thicknesses above 2.00 mm are available only as blanks or pieces.

CHEMICAL COMPOSITION (%)

Grade

C max.

Si max.

Mn max.

P max.

S max.

Ni

Cr

304

0.08

0.75

2.00

0,045

0.03

8.0–10.5

18.0–20.0

304L

0.03

0.75

2.00

0,045

0.03

8.0–12.0

18.0–20.0

Composition may vary with the standard and manufacturer.

MECHANICAL PROPERTIES AND DELIVERY CONDITIONS

Condition

Hardness

Tensile strength

Finish

Edges

Annealed

93 HRB max.

≈ 610 MPa

2B (pickled)
BA (bright polished)

Sharp edges
Rounded edges*

*Confirm the BA finish and edge condition when requesting a quote. Check batch hardness for deep-drawn parts.

DIMENSIONAL PROPERTIES — STANDARD STOCK

Thicknesses and
tolerances
(mm)

0.05 ±0.01
0.10 ±0.02
0.15 ±0.02
0.20 ±0.02

0.30 ±0.03
0.40 ±0.03
0.50 ±0.04
0.80 ±0.04

1.00 ±0.05
1.20 ±0.05
1.50 ±0.06
2.00 ±0.06

2.50 ±0.09
3.00 ±0.10
4.00 ±0.12

Width

Maximum 310 mm

Typical stock tolerances. Values may vary with origin, manufacturer and delivery condition. Thicknesses above 2.00 mm are available only as blanks or pieces.

INTERNATIONAL GRADE EQUIVALENTS

DIN 1.4301 / 1.4306

X5CrNi18-10 / X2CrNi19-11

UNS S30400 / S30403

Product FAQs

Search the website

Enter at least two characters.

Theoretical weight calculator per meter

Enter the thickness and width of the strip to estimate the weight in kg/m.

Strip dimensions

Limits of this calculator: width up to 350 mm and at least ten times the thickness. Availability depends on the product.

Select the thickness and enter the width.

Estimate with reference density of 7.85 g/cm³, according to the Sandsteel calculator. The result is not a weighing and may vary depending on the alloy and tolerances.