Annealed AISI 304/304L Stainless Steel Strip

The AISI 304/304L Annealed Stainless Spring Steel Strip is stainless steel classified as austenitic, cold laminated, widely used in stamped parts for several domestic industry sectors. This steel presents mechanical properties that especially suit applications whose processes require resistance to corrosion, surface finishing, and a high degree of shaping, including those technical parts that require deep-drawing.

The AISI 304/304L Annealed Stainless Spring Steel Strip industry applications are:

• - Parts stamping requiring stainless steel.
• - Deep-drawn parts (check hardness).
• - Clamps, straps, expansion joints, and serpentines.
• - Surfaces coating

According to our slitter's technical specifications, our stainless steel strips may be supplied as coils, rolls, or steel strips cut to the width requested by the Customer.

More about stainless steel

Norma	C. Máx.	Si	Mn	P. Máx	S. Máx	Ni	Cr
304	0.08	0.75	2.00	0.045	0.03	8 a 10.5	18 a 20
304L	0.03	0.75	2.00	0.045	0.03	8 a 12	18 a 20

Class	Hardness	Resistance to Traction (N/mm2)	Finishing
Annealed	93 HRB Máx.	610	2B (Pickled) BA (Polished and Bright)

Obs.:
1) For parts subject to deep-drawing, batch's thickness must be checked by our commercial department.
2) For BA finish, stock must be confirmed by our commercial department.

Stock Standard.
Thicknesses (mm)	0.05 (+/- 0.01) 0.10 (+/- 0.02) 0.15 (+/- 0.02) 0.20 (+/- 0.02)	0.30 (+/- 0.03) 0.40 (+/- 0.03) 0.50 (+/- 0.04) 0.80 (+/- 0.04)	1.00 (+/- 0.05) 1.20 (+/- 0.05) 1.50 (+/- 0.06) 2.00 (+/- 0.06)	2.50 (+/- 0.09) 3.00 (+/- 0.10) 4.00 (+/- 0.12)
Width (mm)	Maximum 310 mm

Obs.: For thicknesses over 2.00 mm, delivery is made only as blank or part.

DIN 1.4301/1.4306

X5CrNi18-10/X2CrNi19-11

S30400/S30403